Mobile Calibration (MO) Services

NSCL can provide mobile calibration services, i.e. service customers at their premises, using the mobile station especially manufactured for the Laboratory by Mitsubishi Motor Company.
The station is equipped with an AC power generator and its body is thermally isolated to maintain the internal temperature, which is controlled via an air conditioning system.
Belts and dampers are used to secure and protect the measurement standards and other equipment installed inside the station.


Expanded uncertainty (K=2)  Range Measured quantity/Calibrated item
DC, AC Voltage Source
5 μV to 80 mV 100 mV to 1000 V DC Voltage Calibrators
50 μV to180 mV 100 mV to 1000 V AC Voltage Calibrators
10 mV to 200 mV  1 V to 100 V Power Supply 
5 mA to 100 mA   100 mA  to  50 A
DC, AC Current source
10 nA to 20 mA 100 μA to 100 A DC Current Calibrators
40 nA to 50 mA 100 μA to 50 A AC Current Calibrators
DC, AC Voltmeter
5 μV to 80 mV 10 mV  to 1000 V DC  Voltmeter
40 μV to 200 mV  100 mV to 1000 V AC Voltmeter
DC, AC Ammeter
20 nA to 10 mA 50 μA  to 30 A DC Ammeter
40 nA to 25 mA 100 μA to 50 A AC Ammeter
Ohm Meter
2 m Ω to 10 k Ω 1 Ω to 10 MΩ Ohm Meter
60 mA  to 1A 50 A  to 1500 A Clamp meter
Oscilloscope
3 MHz to 10 MHz up to 1 GHz Bandwidth
0.8 mV to 25 mV 10 mV to 200 Vp-p Amplitude
0.0012 10 ns to  5 s Timebase
Insulation Measurement Instruments
5 kΩ to 2 MΩ 1 MΩ to 2000 MΩ Insulation Tester

How To Request Calibration Services

 

Finding Us

  • National Standards and Calibration Laboratory
  • Masaken Barzeh
    Pre-fabricated house area
    Damascus - Syria

Contact Us